MP1890F is a ramies fibre packing, impregnated with mineral grease and PTFE (or tallow) to make it pliable and resilient. A good general purpose pump packing, suitable for a range of water applications and various oils.

Speed: 2000 FPM (10m/sec)

MP8005 is a pure expanded graphite yarn packing. The graphite construction allows this packing to reach high temperature range. As graphite it quite soft and pliable, it makes it suitable for bronze of soft seals and worn equipment. Also available with an Inconel wire insert (MP8005i)

Speed: 4400 FPM (25m/sec)

MP1840 is a tough low abrasion carbon fire braid impregnated with PTFE. It is most suitable for strong caustic and acid applications, and where contamination is prohibited.

Speed: 4000 FPM (20m/sec)

MP4140 is a virgin PTFE fibre yarn heavily impregnated with ultra-pure graphite powder and lubricated with an inert lubrication. It has a very low friction coefficient. Commonly referred to as GFO.

Speed: 2500 FPM (12.5m/sec)

MP4168 is a specialty packing which displays the strength of Kevlar and mechanical qualities of a GFO packing. Designed to resist extrusion at higher pressures, while still maintaining minimal shaft wear. Can you be used in conjunction with other packings as a ‘Bull’ ring in the bottom of a stuffing box to avoid extrusion.

Speed: 2250 FPM (11.5m/sec)

MP4130 is a pure PTFE braided packing. Making it highly resistant to a wide range of chemicals, acids and alkalis. It also conforms to FDA requirements. Is available lubricated with a silicone oil to assist with pump starts (MP4130L)

Speed: 1575 FPM (8m/sec)

Packmaster 2 is a lattice braided spun synthetic yarn lubricated with graphite and petroleum based oil making it durable and resilient. Is an excellent general purpose packing.

Speed: 1500 FPM (8m/sec)

South Eastern Gaskets also supplies packing extractors to more efficiently remove used packing even in tight working conditions. They are available in three sizes:

Size 1 – suitable up to 6.5mm
Size 2 – suitable from 8.0mm – 12.7mm
Size 3 – suitable from 12.7mm and beyond

South Eastern Gaskets also supply packing kits for both MP1890F and MP8005.
The kit includes a meter of 3.5mm, 6.5mm, 9.5mm and 12.5mm respective packing. One of each size extractor handle, cork screw tip and wood screw tips. A picking tool and a multi sized spanner to fit the tips to the extractors. All supplied within a compact carry case.

AB12 and AB18 valve stem seals are made from pure graphite with a stainless steel eyelet for high temperature resistance and excellent sealing quality.

South Eastern Gaskets stock a wide range of die formed graphite rings for valves, pumps and many other applications. The graphite material allows for higher temperatures and purity.

South Eastern Gaskets supply cut gauge glass from borosilicate glass tubing to withstand steam and high temperatures.

Rubber cones are used to seal gauge glass tubes. They are supplied in ½” and ¾” and are moulded in house in EPDM elastomer for steam and higher temperatures.

Expanded PTFE tape displays the same properties of expanded PTFE sheet, but is provided in a spool with a self-adhesive backing to make a cut-to-size gasket while on site.

Fiberglass tapes will avoid combustion or burning and are resistant to high temperatures. They are commonly used for pipe lagging and thermal and insulating wrap. They can also be supplied in a ladder tape configuration to allow for spacing for bolt holes on flanges. Both styles of tapes come in a variety of widths.

Topog-E handhole and manhole gaskets are manufactured using a unique rubber compound to withstand high temperatures and steam while still maintaining a tight seal and preventing corrosion. They come in multiple sizes to suit a large scope of handhole and manhole sizes.